A rough guide to 1025 Second floor conference room A/V operations.

Basic Projector Operation

1. Turn the projector on. Use the wall panel switch (next to the AV

cabinet) or remote control.

2. Screen controls are to the left of the AV cabinet.

3. The projector source should be "HDMI". This may be selected with the

remote control or wall panel button labeled "Table HDMI"

4. There are 3 sources for the "HDMI" input. These are selectable with the

"Cable Matters" remote that stays on the table. It takes a couple of

seconds to change sources - please be patient. Make sure the remote

is pointing at the IR sensor taped to the table behind the pop-up panel.

a. Input 1 (TABLE) is for the HDMI input on the pop-up table panel.

b. Input 2 (OWL) is for the computer on the table.

c. Input 3 (APPLE TV) is for the Apple TV.

To use the Owl

1. Turn on projector and select input #2 for "Owl".

2. Turn on wireless keyboard and mouse.

3. Log in with username "local\isde" and password "OwI_213A". You may be

required to log into the "VU guest" network.

4. Open your conferencing software (Zoom, Teams, etc.) and connect to your meeting.

When You Are Finished

1. Turn projector off.

2. Turn off wireless mouse and keyboard.

Adapters are available on the AV cabinet.

Do not remove or disconnect any AV cables. This is a shared space that does not belong to ISIS.